English
Hrvatski
copy of WAX HEATER TIN AM-220 100W AUTOMATIC BLACK
Professional wax heater with thermostat and temperature display and the ability to work in two modes. It is suitable for all types of depilatory waxes in a can, hard wax, dragees (a bucket is attached to the heater, in which you can melt hard wax or pearl wax).
1. The first operating mode is manual heating mode. This means that the temperature defaults to 90 ℃ after start-up. You can press the "Up" and "Down" buttons to adjust to the required heating temperature. The adjustment range is from 45 ℃ to 125 ℃. In this mode, all button lights are on and all functions can be operated.
2. The second operation mode is 40 minutes quick automatic heating mode. This mode is suitable for heating wax beans. In manual heating mode, shortly press the "Permanent" button to switch to automatic mode. In this mode, the unit automatically heats up to 125 ℃ for 40 minutes and then switches to 90 ℃ constant temperature heating. When the display shows 90 ℃, the appliance beeps twice to indicate that it is at the set temperature.
Technical data:
- Power: 100 W
- Voltage: 220V-240V (60Hz)
- Capacity: 400 ml
- Temperature: 45 - 125 degrees C.
Note:
- Do not heat without wax. Do not submerge in water.
- Make sure the voltage you are using matches the device
- It is not recommended to use on skin with allergies, scars or pimples.
- Before use, check that the wax temperature is suitable for the skin.
- Disconnect the power supply before cleaning
